Publicidad
Idiomas disponibles
Idiomas disponibles
en
instruction manual
41517
Amplified master module with bluetooth
Technical specifications
Power supply
115/230 V~; 50/60 Hz
Consumption max
200 mA (115 V~) / 100 mA (230 V~)
Consumption stand-by
0.3 W
Bluetooth
profile
V. 2.0; Clase II; A2DP & AVRCP (1.3)
®
Max. power output
6+6 W
; (12+12 W
) max; 4 W min.
RMS
PEAK
Note
The sound unit must be connected to a mains voltage between 115 and 230 V~ 50/60Hz, prior to being used.
Because these devices communicate by radio frequency, depending on the environment interference and objects, communication can be altered.
There is not any LED indicator, so it is necessary to connect at least one speaker (better two) in order to check the unit is working properly.
External audio amplifiers (i.e. E17G/D, 40425 & 40430) can be attached to the audio output. To do so, connect 41517 terminals L+, R+ & 4(GND) to the audio amplifier
input terminals +L, +R & GND respectively.
Wiring diagram
Basic example only with Bluetooth
®
SINGLE HALL OR ROOM ONLY WITH BLUETOOTH
MODE, SOUND IN FALSE CEILING
®
230 V~ / 115 V~
±15%; 50-60 Hz
N
L
L
R
L+
L–
R+
41517
R–
Min. 4 W per channel
Distance from bluetooth
device
®
6+6 W
from 1 to 30 m depending on the environment.
User bluetooth
device
®
(smartphones, tablets and PC laptops).
Av. Almozara, 79 • 50003 ZARAGOZA - Spain • T. +34 976 40 53 56 • F. +34 976 40 53 54 • e-mail: export@egiaudio.com • www.egiaudio.com
4 1 5 1 7
HIGH QUALITY SOUND
®
connectivity
Mechanical format
Electrical ballast
Size cutting
ø65 mm.
Weight (Kg.)
0.162
Dimensions (mm)
170 x 48 x 50
Operation in Bluetooth
®
mode only
without remote control
First connection
41517 master module works in Bluetooth
®
mode only when powered for the first
time or after a blackout. Initial state is stand-by: the module is visible to any Bluetooth
device and can be paired with it.
Module Friendly Name is "EGI 41517 xxxx". This name will appear on the Bluetooth
device screen when searching. EGI is the brand, 41517 is the product reference and
"xxxx" stands for the last four digits of the serial number.
Every module has a unique Friendly Name, so the user can know which module is
connecting to. Friendly Name is printed on two labels: one is attached to the enclosure,
and the other one is left loose into the packaging.
Pin code linking
A 4-digit random password / PIN code is printed on the labels. It must be keyed
in during linking process.
Once linked and connected, the module will start to sound.
WARNING: Please don’t lose the labels so that the Friendly Name and the PIN
code are always available.
Turning ON
The module remains in standby state until it is connected to a Bluetooth
When connected, it goes to ON state: audio output is activated, volume is adjusted
to its preset value and equalizer is set to achieve optimum performance.
Since then, volume control and music selection will be controlled from the linked
Bluetooth
device.
®
NOTE: Disconnection causes are: manual command from the device or lost of coverage.
When disconnected, module goes to standby state: audio output is disabled and the
module is visible/connectable again. In other words, it can be linked to a new
Bluetooth
device or connected to a known device (one that has been linked previously).
®
Access to LINK internal key on the back side of 41517.
LINK
41517
Volume / Link / Reset key
LINK key has three functions:
1. Every short press on LINK key reduces preset volume in -6 dB steps up to -68 dB, and then it goes to maximum level again.
2. A long press (more than 6s) produces a RESET of the module: preset volume is set to maximum, Friendly Name and PIN code return to the value printed on the labels.
Problem
Module doesn’t work at all.
The module can be linked to a Bluetooth
For use in Mexico, the operation of this equipment is subject to the following two conditions:
1. It is possible that this equipment or device does not cause harmful interference and
®
2. this equipment or device must accept any interference, including interference that may cause undesired operation.
®
EGi guarantees its electronic and electroacoustic products against any manufacturing defect that affects its operation for 36 months from the production date (indicated in every manufacture), taking
the commitment of repairing or replacing the faulty modules which failure, always to the discretion of EGi, is caused by a manufacturing defect, without any charge for spare parts.
This guarantee does not include charges for the shipping and handling of the modules, nor the labour charges for the replacement in the installation of the aforementioned electronic and electroacoustic
modules. The guarantee will not cover in any case the damages or breakings of the trimming pieces (lattices, trims, masks, frames...).
This guarantee refers only to the concept of replacement in factory of the modules produced by EGi, excluding any other cover or responsibility on the rest of the materials or the whole of the
installation that is put at the user disposal, but that is not supplied nor executed by EGi.
Therefore this guarantee does not cover:
a.
The fitting up and the interconnection between the modules.
b.
The results from the abuse or misuse of the product, including but not limited to:
b.1.
Not using the product for usual purposes, or not following the instructions from EGi for the correct use and maintenance of the product.
b.2.
The installation or use of the products in a way that is not concordant with the technical or security rules now in force.
c.
The malfunctions caused by the wrong installation of the modules, or by an installation with inappropiate cables.
®
device.
d.
The malfunctions caused by the intervention of a person non-authorised by EGi.
e.
The consequences of mixing with equipment from other sources, and also adaptations, modifications, adjustments and/or adjustment attempts, irrespectively of those that have been performed in a
technically correct way, provided that there is not an express authorisation by EGi.
f.
The consequences of accidents, natural catastrophes or any cause beyond
In all these cases that are excluded from the guarantee, and every time that the modules are not considered as faulty by EGi, the sender should take responsibility of the full amount of the repair, and
in the event of a visit from our technicians, the requesting person will bear the expenses originated without a cause justified in the guarantee.
ATTENTION:
If you notice any problem in your
EGi
Preset volume adjustment
Preset volume is factory-set at maximum level. However, it can be changed and
limited by means of LINK key, which is located on the back side of 41517 module.
Every short press on LINK key reduces preset volume in -6 dB steps up to -68 dB,
and then it goes to maximum level again.
Once adjusted, preset volume is stored and is value is kept even in case of power
failure. It can be adjusted again or be reset to factory-set value (maximum) by pressing
LINK key for 6 seconds or more.
WARNING: Keep in mind that a RESET can modify other parameters.
NOTE: In Bluetooth
®
mode, the user can control volume level from the device. We
suggest leaving the volume of 41517 module at maximum level. This way maximum
performance can be obtained and the control is more comfortable.
Troubleshooting
Possible solution
Check that the sound unit is powered. A voltage between 115 and 230 V~
50/60Hz must be applied to L and N terminals.
®
device, but there is no sound.
Check that the speakers are properly connected to L+ / L– y R+ / R– outputs.
Verify the absence of short-circuits and check that the speakers line impedance
is above 4 ohms. Make sure that a Bluetooth
volume level to maximum.
Information
Guarantee
EGi
control, including but not limited to lightning, water and public disturbances.
installation, our Customer Support Service will attend you from 9h. to 13h (Central European Time).
device is connected, and set
®
Publicidad
