Basement Sentry STWB140 Manual Del Usuario página 8

Glue one end of the pipe to the rotating elbow,
and glue the other end of the pipe to the foot
valve. Use 2 step primer and glue.
FLOAT VALVE INSTALLATION
With the float in the OFF (down) position, attach
the float valve to the suction pipe using the
included metal float bracket and hose clamp.
The bottom of the float should be placed a few
inches above the ON position of the primary
pump.
Be sure the float is free from any obstructions in
the ON and OFF positions.
Fully insert one end of the included 5/32-in.
tubing into the quick connect fitting at the top of
the float valve. Be sure connection is secure.
Metal clamps
Suction pipe
Primary
Pump
8
Rotating
Elbow
Pipe and
Foot Valve
On/Off Float
Float
A few inches
On level
5/32-in. Tubing
Quick
connect
Fitting
On/Off
Float