3B SCIENTIFIC PHYSICS 1021406 Manual De Instrucciones página 7

3B SCIENTIFIC ® PHYSICS
Electric field meter @115 V 1021406
Electric field meter @230 V 1021405
Instruction manual
1. Safety instructions
The electric field meter complies with safety reg-
ulations for electric measuring, control and la-
boratory instruments in accordance with DIN EN
61010 part 1 and is designed to fulfil require-
ments for protection class III. It is intended for
use in dry rooms suitable for electrical equip-
ment. The electric field meter may only be used
in conjunction with its own plug-in power supply.
Safety is guaranteed as long as the equipment is
used as specified. No such guarantee can be
made, however, if the plug-in power supply (17)
should be damaged. If such damage occurs, the
1 Socket for plug-in power supply
2 Measurement voltage output
3 Socket for CMA interface
4 Ground socket
5 Offset (zero calibration)
6 Range selector switch
7 Field detector vanes
8 Rotor
10 Ground socket
11 E/V selector switch
12 Rod for vertical mounting
13 Capacitor plate, 250 cm²
14 Plate separation adjustment
15 Fixed capacitor plate
16 Voltage measurement plate 1x
17 Plug-in power supply
power supply must be replaced (P-1001014 230
VAC or P-1009545 115 VAC).

Take care when positioning the voltage
measurement plate (16) or the fixed capaci-
tor plate (15) next to the field detection vanes
(7).
The equipment has to be turned off by dis-
connecting the plug-in power supply from the
mains.

Any discharges resulting in sparks could
destroy the equipment and must be avoided
at all costs.

Never touch the rotor while it is moving.
1