Danfoss AK-SC255 Guía De Solución De Fallas página 4

AK-SC255/355
For Danfoss Technical Support call +1-410-931-8716 / Para Soporte Técnico de Danfoss llame al 01-800-823-8000..
4
Troubleshooting Guide / Guía de Solución de Fallas
Note: Before calling Danfoss Technical Support on any of the following concerns
please do the following: Power down the controller, check all wiring and cabling
connections (both screw terminals, Fig. 1 or plug-in connections, Fig 2. Check that
to see that the CPU card, Fig. 3 is firmly in place. If found to be unevenly seated
press firmly on its corners until it no longer moves. Finally, power up the unit and
recheck for the initial complaint. See diagrams below.
USOC.EI.RF0.D2.ML / 521U0197
High voltage input
power at MK1
LON terminals
Figure 1
Plug in connections
Figure 2
Figure 3
©Danfoss (USCO / MK), 09-2011
5Vdc connection at
P1
A1 alarm relay
terminals and
RS485 terminals
CPU card
With the power OFF,
re-seat by firmly
pressing on corners