Adjusting The Light Heads - Commercial Electric 56566161 Guia Del Usuario

Installation to an electrical Outlet Box (continued)
4
Attaching the fixture body to the
SpeedMount™ socket
□ Screw the threaded base on the fixture body (A) clockwise
into the SpeedMount™ socket (CC).
□ Restore power at the electrical panel.
□ Turn on the light switch to activate the fixture.

adjusting the Light heads

This LED light fixture has three light heads that can each be adjusted to direct the light where desired.
□ Move each light head into the desired position with your hand, from 0° with the head pointing straight down to 60°.
nOte: The factory default setting for the adjustable heads is 0° beam angle, with the three heads positioned together pointing straight down.
0°-60°
6
CC
A