Adjusting The Color Temperature Of The Light - Commercial Electric 54197201 Guía De Uso Y Cuidado

installation (continued)
5
Connecting another light fixture with
end-to-end linking connector
□ Use the end-to-end linking connector (D) to add additional
light fixtures, if desired.
D
D

adjusting the Color Temperature of the Light

This LED light fixture allows you to customize the color temperature of the light using three settings: warm white, soft white, or bright white.
□ Choose your favorite correlated color temperature (CCT) from three options: 2700K Warm White, 3000K Soft White, or 4000K Bright
White.
□ Move the toggle switch on the light fixture (A) to make your selection.
nOTe: The factory setting for the correlated color temperature (CCT) is 2700K, which is the warmest white light.
6
operating the light fixture
□ Use the 3-position switch on the light fixture to control
the lights.
□ Press down on the left side of the switch for 50%
brightness.
□ Position the switch in the middle to turn it off.
□ Press the right side of the switch down for 100%
brightness.
A
A
3-Position
Switch
6
B