Sony DSBK-2020 Instrucciones De Instalación página 30

30 Installation
Harness (CN201, CN202)
Cable holder C
Cable holder
B
HIF-34 board
8
Replace the board retainer which you removed in step 2 in its
original position.
Push the board retainer into the board retainer guide, and fasten the
screw in the screw hole.
Check that the six claws on the underside of the board retainer
engage with the boards in the slots to hold them in position.
Cable holder A
Ferrite core
i.LINK harness
Connector panel
Groove D