Toparc 064072 Traducción De Las Instrucciones Originales página 8

Translation of the original instructions
EN
PLASTIC WELDING STATION
SAFETY INSTRUCTIONS
These instructions must be read and understood before
any operation, and any modifications or maintenance not
specified in the manual must not be carried out.
The manufacturer is not liable for any injury or damage
due to non-compliance with the instructions featured in this
manual. In the event of problems or uncertainties, please
consult a qualified person to handle the installation properly.
This unit can be used by children aged 8 or over and by
people with reduced physical, sensory or mental capabilities
or lack of experience or knowledge, if they are properly
monitored or if instructions for using the equipment have
safely been read and potential risks understood. Children
must not play with the product. Cleaning and maintenance
should not be performed by an unsupervised child.
Do not use the charger if the mains cable or plug is damaged.
Do not cover the device.
Fire and explosion risks!
• Use caution when using the appliance in areas where
combustible materials are present;
• Do not apply for a long time in the same place
• Do not use in the presence of an explosive atmosphere;
• Be aware that heat can be directed onto combustible
materials that are out of sight;
• Place the unit on its stand after use and allow it to cool
before storage;
• Do not leave the appliance unattended
Protections :
To protect yourself and others, follow these safety instructions:
Use eye protection
Use gloves that guarantee thermal insulation.
Use protective clothing
Working on plastic can create dust or smoke that is dangerous
to health. It is recommended to wear respiratory protection
or to have adequate ventilation, air supply is sometimes
necessary.
8