Basic Safety Guidelines - Master Trimmers MT Tumbler 200 Manual De Uso Y Mantenimiento

Basic safety guidelines

Security symbols
DANGER
This symbol indicates that there is a potential imminent danger to physical integrity and life. Failure to
observe the instructions can lead to serious harmful effects causing possible injury with danger of death.
WARNING
This symbol indicates that there is a potential imminent danger to physical integrity and life. Failure to
observe the instructions can lead to damage to the machine and to the user.
INFORMATION
This symbol indicates that suggestions and especially practical information can be found below. This
symbol indicates suggestions and practical information. Ignoring this advice could result in misuse of the
machine.
User safety
+
The material that is fed to the stainless steel grid of the machine must only be damp herbaceous and/or semi-woody
plants. Other materials could cause damage to the machine and injure the user.
+
Always wear gloves and safety goggles when using the machine and avoid wearing loose clothing.
+
Keep hands and hard objects away from the blade.
+
Keep your eyes away from the stainless steel grid while the machine is operating, as splinters could fly out (always
wear safety goggles).
+ Only use the machine if it is in perfect condition, otherwise there are potential risks of injury to the user.
+
Safety devices (switches, stainless steel grid, racks, etc.) must not be dismantled under any circumstances.
+
Make sure that the top and side covers are securely closed before performing the maintenance before performing the
maintenance.
Intended users of the MT Tumbler 200
Master Products machines must only be used by an adult who has read and understood the instruction manual.
How to switch off the MT Tumbler 200
Master Products machines must always be stopped by using the off switch (red).
The stainless steel grid detector will stop the machine when triggered, but this safety function should never be used routi-
nely to stop the machine.
Before performing any maintenance on the machine you must disconnect it from the mains electricity supply.
Disclaimers
Modifications on Master Products machines without the approval of the manufacturer are forbidden.
The manufacturer withdraws the warranty from any modified machine and does not accept liability for any failures and
accidents that may result.
The manufacturer withdraws the warranty from any modified machine and does not accept liability for any failures and
accidents that may result.
During the warranty period, Master Products machines may only be dismantled and repaired by the manufacturer's engi-
neers or official representatives.
The operator using the machine must check that processed materials are regularly removed. Anything left behind could
become an obstruction and therefore cause the machine to malfunction.
16