Basic Safety Instructions - Master Trimmers MT Gentle 50 Manual De Uso Y Mantenimiento

Basic safety instructions

Safety simbols
DANGER
This symbol indicates that there is a potential imminent danger to physical integrity and life.
Ignoring the instructions can lead to serious harmful effects causing possible injury with
danger of death.
WARNING
This symbol indicates that there is a potential imminent danger to physical integrity and life.
Ignoring the instructions can lead to damage to the product and to the user.
INFORMATION
This symbol indicates suggestions and especially practical information can be found below.
This symbol indicates suggestions and practical information for appropriate handling of
Master Products equipment. Ignoring this advice could result in misuse of the article.
Safety for the operator
+ The plants to be treated with the machine must be fresh, either herbaceous and/or semi-woody. Processing of any
plant of a different nature can cause injury to the user and the machine.
+
Only use the machine with gauntlets that prevent the introduction of the fingers into the holes in the grid.
+
Wear safety glasses to minimize the risk of flying splinters.
+
Never work with loose clothing, loose hair, bracelets, pendants, etc.
+
Do not insert your hands or objects through the lower part (through the bag).
+
Safety devices such as switches, grids, guards, racks must not be dismantled under any circumstances.
Never work under the influence of alcohol and/or drugs.
+
Who can use the MT Master Trimmer Standard 50 / 75
Master Trimmer Standard 50 and 75 machines must only be used by users who have read and understood this
manual.
Machine repair
Only qualified staff can dismantle, repair and install new parts. In the event that the product is in the warranty
period, it must only be dismantled by Master Products staff without voiding the warranty.
How to stop the machine
Master Trimmer Standard 50 and 75 machines are switched off, under all circumstances, whenever the OFF switch is
pressed.
Before carrying out any maintenance action on the machine, it must be disconnected from the mains.
The grid detector performs a safety function only and MUST NOT be used as a stopping system for the machine.
The machine must be switched off and disconnected from the electrical current immediately in case of abnormal
operation.
www.masterproducts.es
23