PA TCH T EST
IMPORTANT: Test on a small area on each intensity level to check
for skin sensitivity. Wait for 24 hours to check for any reaction.
WARNING: Bruising can result if the treatment head isn't
constantly moved over the skin or if too high an intensity level
is used.
PR EP A R IN G THE SK IN
• Cleanse to remove any makeup or dirt.
• Hold a warm cloth over the face to open the pores.
10
T REA T MENT
1. Select your preferred treatment head.
2. To switch on press the ON/OFF button for two seconds.
3. Briefly press the ON/OFF button again to select levels 2 or 3.
Level 1 - Low suction for sensitive skin
Level 2 - Medium suction
Level 3 - Maximum suction
4. Pressing the ON/OFF button a 4th time will turn off the suction.
This is useful as the camera remains on so you can view the
area of skin to be treated. Pressing again will reactivate the
suction on level 1.
5. Pressing the function button turns the camera on and off.
Note: When not connected to a phone / tablet the blue light
treatment is automatically activated when the unit is turned on.