Installation Of The Bracket For Fixation On A Wood Strip Under A Single-Layer Drywall Sheet - ONKRON TS1220 Guia Del Usuario

8.2 Installation of the bracket for fixation on a wood strip under
a single-layer drywall sheet:
• Put the bracket (H) to the wall at a distance
of 43.3" – 53.1" (1100 – 1350 mm) from the
floor. Mark drilling spots of the first bracket.
Put the bracket away for a while.
• Put the second bracket (H) at a distance of
15.7" – 25.6" (400 – 650 mm) from the first
bracket (H). Mark drilling spots of the
second bracket.
• Drill 3.1" (80 mm) deep holes using a Ø4mm
(5/32") drill.
10
• Lay the safety cable (F) through the
upper rail of the stand, and through
h o l e s i n t h e s p a c e r s ( G ) .
• Use key (J) to tighten the screw in
the bracket (H) to fix the cable (F).
(80 mm)
G
J
F
H
H
F