Steren CAU-270 Manual De Instrucciones página 15

INSTRUCTIONS
How to use the iron holder
IRON HOLDER
Before using the unit, damped the sponge with
water and squeezed it dry. Failure to do so may
result in damage to the soldering tip.
1. Dampen the small cleaning sponge with water
and then squeeze it dry.
2. Add water in the iron holder base and the small
sponge will absorb it to keep the larger sponge
above it wet at all times.
3. Finally, place the sponge in the iron holder base.
The soldering iron must be placed in the iron holder when not in use.
Connections
To avoid damages be sure to turn off the power switch before connection or disconnecting
the soldering iron.
1. Connect the cord assembly plug to the receptacle in the station, and adjust the secure
knob.
2. Place the soldering iron in the iron holder.
3. Plug the power cord into the power supply.
5
CAU-270