Disassembly - Abicor Binzel xFUME FLEX Instructivo De Servicio

11 Disassembly

11 Disassembly
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly, disassembly and repair work:
• Switch off the device.
• Disconnect all electrical connections.
NOTICE
• Only qualified personnel are permitted to perform work on the device or system.
• Check and wear your personal protective equipment.
• Personnel near the device when it is being disassembled must wear personal protective equipment.
• It is not allowed to clean the device using compressed air or a hammer.
Follow the instructions described in Chapters 6 and 7 in reverse order to disassemble and dispose of the device.
 6 Commissioning on page EN-9
 7 Operation on page EN-14
Dispose of the components in accordance with legal regulations.
 12 Disposal on page EN-23
EN - 22
xFUME FLEX
BAL.0733.0 • 2021-01-11