Fan Speed; Power Cooling; Dehumidification; Fan - LG PREMTC00U Manual De Instalación

OPERATION INSTRUCTIONS - Standard Operation
10

Fan speed

You can simply adjust desired fan speed.
1 Press button to change fan speed.
SLO LO MED HI
AUTO POW
h Some fan speed may not operate
depending on the product.
h AUTO fan speed
- It is displayed as an animation effect like
below.

Power cooling

1
Press button until 'Po' is displayed.
!
NOTE
• Power cooling quickly lowers the
indoor temperature.
- Desired temperature: 64°F(18°C)
- Fan speed : Power fan speed
- Fan direction: Current fan direction
• If fan speed or desired temperature is
changed, the power cooling is cleared,
and it operates in the cooling operation
mode.
• This function may not be supported,
depending on the models.
OPERATION INSTRUCTIONS - Standard Operation
Dehumidification

Fan

1 Press button repeatedly to adjust the
fan speed.
!
NOTE
• In dehumidification/fan mode
- You cannot adjust set temperatures.
- The menu items of fan speed might
not be partially selected depending
on the product functions.
• Using dehumidification mode in rainy
season or high humidity climates, you
can feel dehumidification and cooling
mode at the same time.
• Fan mode only circulates the indoor air
without changing the room
temperature.
11

Auto operation (Dual set points)

This function automatically manages room
temperature based on two types of set
temperature(cooling and heating) and provides
a comfortable environment.
1 Press button to select auto
mode(Dual set points control).
2
Press buttons and then cooling and
heating temperature will blink.
3 You can control the blinking temperature
by pressing bottons.
h If you want to control each temperature,
press botton when temperature icons
blink.

Cooling operation state