A/C Condenser Removal and Installation
Instructions
Prior to the installation of this DENSO First Time Fit
instructions completely.
Definition of Terms
D DWARNING:
D DCAUTION:
NOTE:
General Service Information and Requirements
DWARNING: Any sensor(s) removed or moved during the part installation process may
require the sensor(s) to be recalibrated after replacement. Please refer to the manufacturer's
vehicle service manual.
D DCAUTION: Only trained personnel who have a thorough knowledge of automotive
air-conditioning systems, the proper tools and an appropriate workspace should perform
repairs to a vehicle air-conditioning system. In addition, only personnel trained in an approved
refrigerant-handling program may recover refrigerant from and charge refrigerant to an
automotive air-conditioning system.
NOTE: DENSO strongly recommends the replacement of the receiver-drier or accumulator
when the A/C system has been opened and exposed to atmospheric conditions during the
repair process.
REQUIRED TOOLS:
Safety Goggles
Assorted Hand Tools
Refrigerant Recovery Machine
Charging Station / A/C Manifold Gauge Set
Vacuum Pump
Electronic Leak Detector
Torque Wrench
Refrigerant Identifier
Describes precautions that should be observed in order to prevent injury or
death to the user during installation.
Describes precautions that should be observed in order to prevent damage
to the vehicle or its components, which may occur during installation if
sufficient care is not taken.
Provides additional information that facilitates installation work.
A/C condenser, you must read these
®
LA990009-1376.4