ASROCK X299 Taichi CLX Manual Del Usuario página 28

Power LED and Speaker
Header
(7-pin SPK_PLED1)
(see p.1, No. 21)
Serial ATA3 Connectors
(SATA3_0_1:
see p.1, No. 15)
(SATA3_2_3:
see p.1, No. 16)
(SATA3_4_5:
see p.1, No. 17)
(SATA3_6_7:
see p.1, No. 18)
(SATA3_A1_A2:
see p.1, No. 19)
USB 2.0 Headers
(9-pin USB3_4)
(see p.1, No. 30)
(9-pin USB5_6)
(see p.1, No. 29)
26
Please connect the
SPEAKER
DUMMY
chassis power LED and
DUMMY
the chassis speaker to this
+5V
header.
1
PLED+
PLED+
PLED-
These ten SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* To minimize the boot
time, use Intel® X299
SATA ports (SATA3_0~7)
for your bootable devices.
* If M2_3 is occupied by
a SATA-type M.2 device,
SATA3_7 will be disabled.
There are two headers
USB_PWR
P-
on this motherboard.
P+
GND
DUMMY
Each USB 2.0 header can
support two ports.
1
GND
P+
P-
USB_PWR