LOWES BDB52ABZC5M Manual Del Usuario página 10

CLOSEMOUNT-STYLE FAN MOUNTING
2a.
Remove every other screw and lock washer from
top of motor housing (D).
2b.
Remove pin (K), clip (L) and preassembled set
screws and nuts from yoke on motor housing (D).
They are not needed for this installation type.
3.
Pull wires up through hole in the middle of the
canopy (B) and attach canopy (B) to motor
housing (D) using the three screws and three lock
washers previously removed.
4.
Temporarily hang fan on the tab on the mounting
bracket (C) using one of the non-slotted holes in
the canopy (B).
2a
D
2b
Set Screw
and Nut
L
D
3
D
D
4
C
B
10
Yoke
K
B
Tab
D