INITIAL INSTALLATION
Turn off circuit breakers and wall switch to the fan
1.
supply line leads.
DANGER: Failure to disconnect power supply
prior to installation may result in serious injury or
death.
2.
Determine mounting method to use.
A. Downrod-style mount (standard or angled
ceiling)
B. Closemount-style (standard ceiling only)
IMPORTANT: If using the angle mount, check to
make sure the ceiling angle is not steeper than 19°.
*Helpful Hint: Downrod-style mounting is best
suited for ceilings 8 ft. or higher. For taller ceilings
you may want to use a longer downrod (not
included). Angle-style mounting is best suited for
angled or vaulted ceilings. A longer downrod is
sometimes necessary to ensure proper blade
clearance.
3. Check to make sure blades (F) are at least 30 in.
from any obstruction and at least 7 ft. above the
floor.
1
2
19° max.
A
B
3
F
7 ft.
min.
6
30 in.
min.