Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
E
LAMINATOR CONTROLS
A
On / off switch
B
Power on button
C
Temp button
D
Reverse button
E
Carry handle
CAPABILITIES
Performance
Entry width
Pouch thickness (min)
Pouch thickness (max)
Warm up time (estimate)
Cool down time
Lamination speed (+/- 5%)
Number of rollers
Ready indication
Auto & manual reverse function
Clear Path / Anti-jam engine
LED interface
Sleep mode
IMPORTANT SAFETY INSTRUCTIONS - KEEP FOR FUTURE USE
- The machine is for indoor use only. Plug the machine into an easily accessible socket.
- To prevent electrical shock - do not use the appliance close to water, do not spill water on to the appliance, power cord or wall socket.
DO ensure the machine is on a stable surface.
DO test laminate scrap sheets and set the machine before final laminations.
DO remove staples and other metal articles prior to laminating.
DO keep the machine away from heat and water sources.
DO turn off the machine after each use.
DO unplug the machine when not in use for an extended period.
DO use pouches designed for use at the appropriate settings.
DO keep away from pets, while in use.
FEATURES & TIPS
'Pouch Protection' function
The machine includes two 'Auto-reverse' functions designed to protect the
laminating pouch. When in use, the machine will:
(1) scan the pouch for creases and errors in loading.
(2) to check for blockages debris within the mechanism
When these errors are detected the machine will automatically operate in
reverse for (1) 5 seconds or (2) 20 seconds to eject any pouch.
'Safe Start' function
When switched on, the machine has a default 'Safe Start' function which
always starts up at the Cold setting. You may select other hot temperature
settings if required. The machine will warm-up and alert the user when it is
ready.
'Sleep Mode' function
If the machine is not active for 30 minutes, the 'Sleep Mode' function will
place the machine into standby mode. To operate the machine, press the
'Power On' button on the control panel.
4
12.5"
3 Mil (per side)
7 Mil (per side)
minimum 3 minutes
30-60 minutes
approx. 18"/min (fixed speed)
4
Light & beep
Yes
Yes
Yes
Yes (30 minutes)
F
Pouch / document entry slot
G
Entry support shelf
H
Pouch / document exit
I
Illuminated user interface
J
Exit tray
Photo-capable
Carrier-free
Carry handles
Exit tray
Technical Data
Voltage / Frequency / Current(Amps)
Wattage
Dimensions (HxWxD)
Net weight
Max document thickness
(laminating capacity)
DO NOT leave the power cord in contact with hot surfaces.
DO NOT leave power cord hanging from cupboards or shelves.
DO NOT use appliance if the power cord is damaged.
DO NOT attempt to open or otherwise repair the machine.
DO NOT exceed the machines quoted performance.
DO NOT allow children to use this machine without adult supervision.
DO NOT laminate sharp or metal objects (eg: staples, paper clips).
DO NOT laminate heat-sensitive documents (eg: tickets, ultrasounds etc).
DO NOT laminate with self-adhesive pouches which require a cold setting.
DO NOT laminate an empty pouch.
•
For best results, use Fellowes ® brand pouches:
3 Mil, 5 Mil, 7 Mil.
•
For self-adhesive (cold pouches) only use the cold setting.
•
This machine does not need a carrier to laminate. It is a carrier-free
mechanism.
•
Always put the item to be laminated into the appropriate sized pouch.
•
Always test laminate with a similar size and thickness before final process.
•
Prepare pouch and item for lamination. Place item within pouch centered
and touching the leading sealed edge. Ensure the pouch is not too large for
the item.
•
If required, trim excess material from around the item after lamination and
cooling.
•
When working with different pouch thickness' (temperature settings) it is
recommended to first start with the thinnest pouches.
Yes
Yes
Yes
Yes
120V AC, 60Hz, 6.7A
800 Watts
23" x 7" x 5"
10lb
0.03"
Publicidad
Tabla de contenido
