Installation; General Information - KBS edenox DBM-211-M-W Serie Manual De Instrucciones

The manufacturer shall not be held liable for any damage attributable to the failure to follow
the instructions contained in this manual, hence it is recommended that you carefully read all
information herein.
Keep the manual for later use.
Warning!!!
Do not use the device if it is faulty.
1.3 TECHNICAL PARAMETERS
MODEL
DIMENSIONS (mm)
length
DBM-211-M-W
790
DBM-311-M-W
1115
DBM-411-M-W
1440

2. INSTALLATION

2.1 General information.

2.2 Transport, lifting, unpacking, storage.
2.3 Intended use and limitations.
2.4 Layout and description of the manufacturer's rating label.
2.5 Installation and assembly.
2.6 Connections (electricity, gas, and water).
2.1 GENERAL INFORMATION.
The water bain-marie should be unpacked, installed and tested by qualified service personnel.
After being brought into the room where it is going to be installed, the device should be left for
approximately 6 hours so that it can achieve the ambient temperature. Then it can be connected to
power supply.
2
edenox.com
EXTERNAL CAPACITY
width high
610 304 2 x GN1/1
610 304 3 x GN1/1
610 304 4 x GN1/1
*CUTOUT
DIMENSIONS
GN
(mm)
length width
770 585
1095 585
1420 585
ENGLISH
VOLTAGE POWER WEIGHT
(V/Hz) (W)
230/50 1600
230/50 2400
230/50 3200
(kg)
33