selected language is available on the program transmitted, the main language of the program will be
used.
6.4.3. S ubtitle
Set the language for displaying subtitle program (availability depends on channel broadcaster).
6.4.4. G MT usage
Configures the region and strip time GMT. Press the [left/right] to select an option and press the
buttons. [OK] to confirm your selection allows you to enable / disable the automatic update of the
zone.
Select local time when the hourly automatic setting is off. If you know where you are (with respect to
GMT) time zone you select off, the appropriate time zone.
If not is enabled auto zone time so that the D2900 automatically update the time zone through the
information present in the DVB-T signal.
Note: Some countries are covered by more than one time zone. Spain uses GMT + 1 (except Canary
Islands used GMT).
6.4.5. T ime Zone
Select an appropriate time zone to display the local time correctly. Both EPG and system schedule
need a correct time zone setting.
6.5. System Schedule
This feature allows the receiver to automatically switch on and tune to a pre-specified channel for a
pre-set length of time. Up to10 tasks can be scheduled.
Press [UP/DOWN] button to highlight the System Schedule options, then Press the [OK] button to
into the System schedule setup.
In the Schedule panel, use the [UP / DOWN] key to select a task and use [LEFT/RIGHT] key to switch
between Inactive and Active.
Press [OK] to enter the detail page.
Enter the following settings as required. Use the [UP / DOWN] key to move between setting items, the
[LEFT/RIGHT] key to switch between available selections and numeric keys to enter numeric value.
6.6. Recording & PVR Settings
The D2900 allows to record directly DVB-T programs (you must have a USB data storage device con-
nected). Press ZOOM/REC in the remote control to start the recording, to stop it press STOP button.
A file with the name of the tuned channel, time and starting date of the recording will be created.
11