Display Setup - ENERGY SISTEM ENERGY D2900 Manual De Usuario

Choose the supported subtitle language when playing MPEG-4 format media.
8.2. Display Setup
8.2.1. TV Standard
Set the video output signal (NTSC - PAL - AUTO)
8.2.2. A spect Ratio
The T5850 allows you to set the display format on the screen:
≥
4:3 LB (LetterBox): Typically for wide screen content on conventional 4:3 TV with black bars
above and below the picture.
≥
4:3 PS (PanScan): Typically for wide screen content on conventional 4:3 TV with left and right
edges cropped.
≥
16:9: Typically for wide screen 16:9 TV.
8.2.3. V ideo output
According to the output jack of TV set, you can choose CVBS or RGB.
8.2.4. H DMI Resolution
Set the HDMI resolution according to the available modes on the connected TV.
480i - 480p - 576i - 576p - 720p - 1080i - 1080p
Note: This menu is enabled only then the D2900 is connected to a TV by HDMI.
8.3. Preference
8.3.1. Change PIN
Allows you to change the restrictions. The default password is 6666.
8.3.2. D efault Type
In the Default Type options, you can choose the DVD MODE, DVB MODE, USB MODE, USER SELECT,
LAST OPERATING TYPE, MY RECORD
8.3.3. Default
Restore D2900to factory default settings. All user settings will be restored to factory default values
and the TV/radio channel database will be erased together.
8.3.4. S ystem Info
The system info includes model, HW, SW and Date.
14