Página 2
Keep this Assembly Manual for future reference. Two adults recommended for assembly This product is not intended for commercial use. Do NOT return this product. Follow little seeds on For missing or broken parts - Visit littleseedskids.com - Call 1-800-489-3351...
Do NOT return this product! Contact our friendly customer service team first for help. Assembly Tips Call us! 1-800-489-3351 Tube Monday-Friday 9am - 5pm CST Visit littleseedskids.com to view the limited warranty valid in the U.S. and Canada. Helpful Hints PEOPLE NEEDED FOR ASSEMBLY: 1-2 ESTIMATED ASSEMBLY TIME: 1 HOUR - Open your item in the area you plan to keep it for less heavy lifting...
Before You Start Read through each step carefully and follow the proper order Separate and count all your parts and hardware Give yourself enough room for the assembly process Have the following tools: Flat Head Screwdriver, #2 Phillips Head Screwdriver and Hammer Caution: If using a power drill or power screwdriver for screwing, please be aware to slow down and stop when screw is tight.
Página 5
Board Identification Headboard Top Rail Bottom Rail 39060103030 39060103010 39060103020 Center Support Footboard Side Panel 35321103050 39060103060 39060103040 littleseedskids.com...
Página 6
Board Identification Bed Slat (x2) End Support (x2) Bed Board (x2) 35321000070 35321000080 35321000090 SIDE Drawer Front (x2) Drawer Side (x4) 39060103100 39991149346200C BACK Drawer Bottom (x2) Drawer Back (x2) 39991341090510D 39991149089490B littleseedskids.com...
Página 7
Board Identification SIDE BACK SIDE littleseedskids.com...
Parts List Actual Size (x1) (x8) (x4) (x8) (x11) (x4) #A22610 #A23100 #A21660 #A53510 #A22620 #A23050 4mm hex key wood dowel angle bracket confirmat cam bolt cam lock (x8) (x8) (x36) (x20) #A12930 #A21970 #A12120 #A11080 #8 x 1-1/8" screw drive fastener #8 x 7/16"...
Página 9
Parts List Not Actual Size Left Cabinet Member Right Cabinet Member Left Drawer Member Right Drawer Member (x2) #A56750 Drawer Slide Kit (x2) #A54900 Metal Drawer Brace littleseedskids.com...
Página 10
Step 1 Note: This unit should be assembled on a clean surface. This bed can be assembled with the drawers on the right side of the bed or the left side. This step shows both options. The Head Board (A) has square corners and Foot Board (F) has curved corners.
Página 11
Step 2 Left Cabinet Member (x8) (x6) #A12930 #A11080 Right Cabinet Member (x1) #A56750 This step is for the drawers to be on the left side of the bed. Marked with an "R" Marked with an "L" * raw edges are shaded littleseedskids.com...
Página 12
Step 3 Left Cabinet Member (x8) (x6) #A12930 #A11080 Right Cabinet Member (x1) #A56750 This step is for the drawers to be on the right side of the bed. Marked with an "L" Marked with an "R" * raw edges are shaded littleseedskids.com...
Página 13
Step 4 Left Cabinet Member Right Cabinet Member (x4) (x3) (x6) (x1) #A22620 #A11080 #A21660 #A56750 Quick Assembly Proper orientation of CAM LOCK Refer to page 3 for cam lock & cam bolt procedure if needed. Align the three holes in center support (E) with three holes in the slides (16a) and (16b).
Página 14
Step 5 (x8) (x4) (x8) #A12120 #A22610 #A21660 (x8) #A53510 * raw edges are shaded littleseedskids.com...
Página 16
Step 7 (x1) (x2) #A23100 #A23050 Attach the Top Rail and Bottom Rail to the Center Support first, then attach the ends to the Headboard second. You may need the help of another person for this step. littleseedskids.com...
Página 18
Step 9 (x8) #A12120 Attach the bed slats to the Top Rail and Side Panel by positioning the angle brackets with the holes and using the screws as shown. littleseedskids.com...
Página 19
Step 10 (x8) (x4) #A12120 #A54520 Finished Edge Finished Edge SIDE SIDE Fasten the brackets on the same surface as the small metal slide holes. littleseedskids.com...
Página 20
Step 11 (x8) #A12120 SIDE Be sure the groove in the drawer sides are centered with groove in the drawer front. SIDE littleseedskids.com...
Página 21
Step 12 SIDE raw surface SIDE littleseedskids.com...
Página 22
Step 13 (x8) #A21970 You will need to tap the drive fasteners with a hammer to securely fasten. SIDE BACK SIDE littleseedskids.com...
Página 23
Step 14 (x4) #A12120 (x2) #A54900 BACK SIDE littleseedskids.com...
Página 24
Step 15 Left Drawer Member (x8) (x4) Right Drawer Member (x2) #A17400 #A11080 #A50435 (x2) #A56750 (x2) Marked with #A50520 an "L" Attach the drawer slides first before laying the drawer down to attach the handle. SIDE BACK SIDE Marked with an "R"...
Página 25
Step 16 Install the drawers as shown. roller cabinet member Note: The drawer bracket holes are slotted. Drawer fronts can be adjusted by loosening screws, making needed adjustments and retightening screws. drawer runner roller littleseedskids.com...
Página 27
MAXIMUM LOADS This unit has been designed to support the maximum loads shown. Exceeding these load limits could cause sagging, instability, product collapse, and/or serious injury. 300 lbs 136.1 kg 30 lbs 13.6 kg Certificate of Conformity 1. This certificate applies to the Dorel Home Furnishings, Inc. product identified by this instruction manual. 2.
Página 28
Visit your local retailer's website, rate your purchased product and leave us some feedback! We would like to extend a big "Thank You" to all of our customers for taking the time to assemble this Little Seeds product, and to give us your valuable feedback. littleseedskids.com...
Página 29
Español Cubierta Delantera Este libro de instrucciones contiene información IMPORTANTE de seguridad. Por favor lea y manténgalo para referencia en el futuro. No Regrese este producto! Comuniquese con nuestro amistoso equipo de servicio al cliente para obtener ayuda. Llamenos al: 1-800-489-3351 (Gratis) Lunes - Viernes 9am - 5pm CST Visitar: www.ameriwoodhome.com PRECAUCION Este mueble puede volcarse y causar graves heridas y/o muerte.
Página 30
Español Página 10 Nota: Esta unidad debe armarse en una superficie limpia. Esta cama puede armarse con los cajones en la parte derecha o izquierda. Este paso muestra ambas opciones. La Cabecera A cuenta con esquinas cuadradas, y el Estribo F tiene las esquinas curvadas. Estas partes tienen perforaciones para sujetar los deslizamientos (16) a ambas opciones.
Página 31
Español Página 22 Usted tendrá que tocar los sujetadores de la unidad con un martillo para sujetar firmemente. Página 24 Marcada con una "R" Marcada con una "L" Fije primero los portaobjetos del cajón antes de colocar el cajón hacia abajo para sujetar la manija. Nota: usted tiene una opción de dos estilos de la manija para atar a los cajones.
Página 32
Français Couverture Avant CE LIVRET D'INSTRUCTION CONTIENT DES INFORMATIONS IMPORTANTES SUR LA SÉCURITÉ. VEUILLEZ LIRE ET GARDER POUR UNE RÉFÉRENCE FUTURE Ne retournez pas ce produit! Contactez notre équipe de service à la clientèle amicale d'abord pour obtenir de l'aide. Appelez-nous: 1-800-489-3351 (sans frais) du Lundi au Vendredi de 9h à...
Página 33
Français Page 10 Note : Ce module doit être assemblé sur une surface propre. Ce lit peut être assemblé avec les tiroirs sur le côté droit ou sur le côté gauche. Cette étape présente les deux options. La tête de lit A a des coins carrés et le pied de lit F a des coins arrondis. Ces pièces comprennent des perforations afin de fixer les coulisseaux (16) de façon à...
Página 34
Français Page 22 Vous devrez taper les attaches d'entraînement avec un marteau pour attacher solidement. Page 24 Marqué d'un « R » Marqué d'un « L » Fixez d'abord les glissières du tiroir avant de poser le tiroir pour fixer la poignée. Remarque: vous avez le choix entre deux styles de poignées à...