Electrical Specifications - Uline H-7095 Manual Del Usuario

ELECTRICAL SPECIFICATIONS

Accuracy is given as ± (% of reading + least significant digit) at 73.4ºF ± 9ºF with relative humidity lower than 80%.
Accuracy is specified for a period of one year after calibration.
1. Temperature Coefficient is 0.1 x specified accuracy / ºC, < 18ºC (64.5ºF), > 28ºC (82.4ºF)
2. AC Functionality: ACV and ACA specifications are AC coupled, True RMS, 45 to 400Hz;
For non-sinusoidal waveforms, additional accuracy crest factor (C.F.) considerations exist as detailed below:
NOTE: Duty add 3.0% for C.F. 1.0~2.0; add 5.0% for C.F. 2.0~2.5; add 7.0% for C.F. 2.5~3.0.
FUNCTION
DC Voltage
Input Impedance: 10M (1GΩ for mV range); Overload Protection: AC/DC 600V
AC Voltage
LPC
LoZ
Maximum input voltage: ±600Vrms.
Input impedance: 10MΩ for all ranges (ACV frequency response is 45~400Hz).
Allow the meter to stabilize for 10 minutes after using LoZ (low impedance) mode.
Accuracy stated for 5 to 100% of range.
FUNCTION
DC Current
Overload protection:
μA mA range: (F1) fuse (6.3×32)mm: FF 0.6A H 600V (CE) fast acting
10A range: (F2) fuse (6.3×32)mm: F 10A H 600V (CE) fast acting
PAGE 11 OF 39
RANGE
40.00mV
400.0mV
4.000V
40.00V
400.0V
600V
40.00mV
400.0mV
4.000V
40.00V
400.0V
600V
400.0V
600V
RANGE
400.0μA
μA
4000μA
40.00mA
mA
400.0mA
4.000A
A
10.00A
SPECIFICATIONS
RESOLUTION
10μV
0.1mV
1mV
10mV
0.1V
1V
10μV
0.1mV
1mV
10mV
0.1V
1V
0.1V
------------
RESOLUTION
0.1μA
1μA
10μA
0.1mA
1mA
10mA
ACCURACY
±(0.7% + 5 digits)
±(0.5% + 2 digits)
±(0.5% + 3 digits)
±(1.0% + 3 digits)
±(0.8% + 3 digits)
±(1.0% + 3 digits)
±(4.0% + 3 digits)
±(1.2% + 5 digits)
ACCURACY
±(0.7% + 2 digits)
±(1.0% + 3 digits)
0621 IH-7095