Technical Features; Safety Precautions; Gb - « Tera » Grooving Machine - Romus TERA Manual Del Usuario

SPECIFICATIONS
The "TERA" grooving machine is designed to form uniform grooves in PVC and
linoleum flooring joints prior to hot welding.

TECHNICAL FEATURES

SAFETY PRECAUTIONS

Before plugging-in the machine, ensure that your system's voltage matches
that shown on the identification plate. Also ensure that the switch is not in the
ON position before plugging-in the grooving machine.
Advice for users
1. Carefully
before using your appliance.
2. Check that the supply voltage
matches that shown on the
identification plate.
3. Make sure that the appliance is
held correctly and is in the
correct working position before
switching it on.
4. Always keep your hands clear of
the cutting zone.
5. Do not remove the protective
covers.
6. Handle this tool with care. If it is
dropped or knocked, check that
it is not damaged and is working
correctly before use.
5
Rated power:
Speed:
Adjustable depth:
Blade shape:
Blade diameter:
Blade bore depth: 20 mm
Width of teeth:
Weight:
read this manual
GB – « TERA » grooving machine
1200 W
5000 rpm
0 to 5 mm
elliptical
125 mm
3.3 mm
5.2 Kg
7. Raise the blade into the high
position after each use.
8. Disconnect the machine before
performing
adjustment.
9. Store your machine in a clean,
dry place after unplugging.
10. Do not force your machine to
perform to its limit
11. Do not leave the machine within
the reach of children.
12. Do not leave the appliance
unattended
unplugging it.
13. Do not unplug the appliance by
pulling on the power cord.
14. Do not carry the appliance by
the power cord.
maintenance or
without first