Glacier bay 67552-1001 Guía De Uso Y Mantenimiento página 6

Installation (continued)
3
Connecting the spray hose to
the faucet
□
Insert the side sprayer (D) hose down through
the sprayer support (E) and sink. Align the
tabs (1 & 2) on the quick connects (3). Push the
quick connector housing rmly upward and
snap it onto the receiving tube tab. Pull down
moderately to ensure the connection has been
made.
□
If it is necessary to remove the quick connector,
squeeze the tabs on the hose, and pull down to
disconnect.
1
3
2
D
E
6
4
Installing the faucet assembly
NOTE: If the sink is uneven, use silicone under the
gasket (B).
□
Place the faucet assembly (A) in position on the
sink.
□
Secure the faucet assembly (A) to the sink using
the mounting nuts (C) provided. Hand tighten
only.
C
A