Kobalt 0056641 Manual Del Usuario página 9

ASSEMBLY INSTRUCTIONS
7. Determine the location for the cabinet
bracket (J). Drill 4 holes (with the diam-
eter of about 8.5 mm) in the wall studs.
Insert D8 x 50.8 mm expansion tubes
(JJ) in the drilled holes. Feed ST4.8 x 57
mm pan head tapping screws (KK)
through 5 x 15 x 1.2 mm washers (LL)
and cabinet bracket (J). Screw ST4.8 x
57 mm pan head tapping screw (KK) to
the D8 x 50.8 mm expansion tubes (JJ)
in the wall studs.
Note: Ensure the cabinet bracket (J) is
installed horizontally, or the two doors will
probably not be properly aligned after
step 8.
Hardware Used
D8 x 50.8 mm expansion tube
JJ
ST4.8 x 57 mm pan
KK
head tapping screws
8. Carefully lift and place the outside
cabinet brackets (EE) into the top
cabinet bracket (J).
7
KK
x 4
5 x 15 x 1.2 mm
LL
x 4
Washer
8
EE
9
LL
J
Wall
J
Lowes.com
JJ
x 4