BV -WF-01-LV Guia De Instalacion página 4

7
8
TAPE HERE
9
CAULK EDGES
Reinstall electrical wiring box and cover.
Reinstall motor assembly (if previously removed).
Plug the fan motor into receptacle on wiring box
cover.
(Complete this step only if adjustable duct is
used.)
From outside, slip adjustable duct into the
aluminum ring attached to the wall cap and tape
the joint.
Compress the excess duct back into the opening
by positioning the wall cap against the outside
wall.
Fasten wall cap to outside wall with screws and
caulk around the edges.
4