Miller Ropax Manual De Instrucciones página 5

06050052-BacouDalloz 8/08/06 15:33 Page 5
ATTENTION :
Other attachment points on the harness are not suitable for use with a fall arrest device.
Photo 5 Photo 6
FITTING A ROPE AND CHEST ASCENDER:
To install the chest ascender, fix a 10mm Delta Maillon EN 362:2004 (sold separately) onto the webbing loops of
the sit harness (photo 7). The lanyard for the rope ascender can also be connected to this Delta Maillon (photo 8).
Fit the webbing sling through the chest ascender and connect the ends to the designated points on the chest straps
(photo 9).
Photo 7 Photo 8 Photo 9
Accessories required: a Delta Maillon in accordance with EN 362:2004
FITTING A DESCENDER:
Depending on the model of descender being used, fit the descender either to the webbing loops (photo 10) or to
the fixed ring (photo 11).
5 5
Photo 10 Photo 11