User Safety - Stanley INTELLILASER PRO Manual De Usuario

GB
User Manual
Lock/Release
Pivot Button
LCD
Laser Power
Button
Push Pins
(Internal Storage)
LCD Screen
1
LASER
_
INTELLI LASERPRO
STANLEY ® IntelliLaser
The IntelliLaser TM Pro Laser Line Level/Stud Finder uses electronic signals to locate the edges of studs,
joists or live AC wires through drywall or other common building materials. Once the edge of a stud has
been detected, the IntelliLaser
assistance for accurate marking.
Pro generates a laser line that can be tilted 180° for use in many leveling/alignment
TM
The IntelliLaser
situations. The IntelliLaser
attachment to many wall surfaces.

User Safety

CAUTION: Read and understand all instructions. Failure to follow all instructions listed below may result
in personal injury:
• DANGER: Laser Radiation, avoid direct eye exposure, serious eye injury can result.
• DO NOT Use optical tools such as a telescope or transit to view the laser beam.
• ALWAYS position the laser so unintentional eye contact will be avoided.
• DO NOT operate the laser around children or allow children to operate the laser.
• DO NOT disassemble. Modifying the product in any way can increase the risk of laser radiation.
WARNING: Use of controls or adjustments or performance of procedures other than those speciied in
this manual may result in hazardous laser radiation exposure.
• DO NOT operate in explosive atmospheres, such as in the presence of lammable liquids, gases, or dust.
• ALWAYS use only the batteries speciied for use with this product. Use of any other batteries may create
a risk of ire.
• ALWAYS store idle product out of reach of children and other untrained persons. Lasers are dangerous in
the hands of untrained users.
2
Laser Plane
Aperture
Level Vial
Live Wire Warning LED
Mounting Hole
Activation Button
LASER
_
INTELLI LASERPRO
2
LASER
_
INTELLI LASERPRO
TM Pro Laser Line Level/Stud Finder
TM
Pro display gives visual and audible indications. The laser line gives visual
TM Pro also incorporates push pins and accommodating mounting holes for
LCD Screen
Callibration
Indicator
AC Detection
3
LASER
_
INTELLI LASERPRO
Stud Sensor Mode
Battery
Indicator
Laser Indicator
4
LASER
_
INTELLI LASERPRO