Product Safety Information; Product Specifications; Installation And Lubrication - Ingersoll Rand 41 Serie Especificaciones Del Producto

Product Safety Information

Intended Use:
These tools are designed to install or remove threaded fasteners.
For additional information refer to Product Safety Information Manual Form 04585006.
Manuals can be downloaded from ingersollrandproducts.com

Product Specifications

Model(s)
41PA8PSQ4
41PA10PSQ4
41PA16PSQ4
40PA24PSQ4
41PA8TPQ4 Pistol Grip, Trigger Permit
41PA10TPQ4 Pistol Grip, Trigger Permit
41PA16TPQ4 Pistol Grip, Trigger Permit
41PA24TPQ4 Pistol Grip, Trigger Permit
41PA8TSQ4 Pistol Grip, Trigger Start
41PA10TSQ4 Pistol Grip, Trigger Start
41PA16TSQ4 Pistol Grip, Trigger Start
41PA24TSQ4 Pistol Grip, Trigger Start
41SA8LPQ4
41SA10LPQ4
41SA17LPQ4
41SA25LPQ4
† K = 3dB measurement uncertainty
pA
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16585754 and table on page 2. Maintenance frequency is shown in a
circular arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
80167356_ed2
Style
Pistol Grip, Push Start
Pistol Grip, Push Start
Pistol Grip, Push Start
Pistol Grip, Push Start
In-Line, Lever Permit
In-Line, Lever Permit
In-Line, Lever Permit
In-Line, Lever Permit
WARNING
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease (Disassembly required, see maintenance instructions)
Free Sound Level dB(A)
Speed (ISO15744)
rpm † Pressure (L
800 78.0
1,000 78.0
1,600 78.0
2,400 78.0
800 78.0
1,000 78.0
1,600 78.0
2,400 78.0
800 78.0
1,000 78.0
1,600 78.0
2,400 78.0
800 74.0
1,000 74.0
1,700 74.0
2,500 74.0
EN
Vibration Level
(ISO28927)
) m/s²
p
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
<2.5
EN-1