Important Safety Instructions - AEG Powertools LMG 50 Manual Original

CONTENTS

Important safety instructions ...................................................1

Specified Conditions of Use ...................................................2
Error Code Table ....................................................................2
Overview.................................................................................3
Change batteries ....................................................................4
Corner Pin ..............................................................................4
Belt Clip ..................................................................................4
Function Switch, Pythagoras, Measuring Reference..............5
Single Distance Measuring .....................................................6
Permanent / Minimum-Maximum Measuring ..........................7
Add / Subtract Measuring .......................................................8
Area Measuring ......................................................................9
Volume Measuring ................................................................10
Indirect Measuring (Pythagoras 1) .......................................11
Indirect Measuring (Pythagoras 2) .......................................12
Indirect Measuring (Pythagoras 3) .......................................13
Wall Area Measuring (Scenario 1) ......................................14
Wall Area Measuring (Scenario 2) ......................................15
Timer ....................................................................................16
Memory .................................................................................16
Basic Description on example of Area measuring (1)...........17
Basic Description on example of Area measuring (2)...........18
ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
Do not use the product before you have studied
the Safety instructions and the User Manual.
Laser Classification
WARNING:
It is a Class 2 laser product in accordance
with EN 60825-1:2007.
Labeling
We have supplied you with an adhesive label in your language
01
Part No. : 4931 4476 87 31x31.37mm
and now request that you please apply this in place of the
English text on the specification plate before first
commissioning the machine.
31
Part No. : 4931 4476 87
447681 01
16.45
XXXXXX MJJJJ
02
Part No. : 4931 4476 88 86x100mm
WARNING:
Avoid direct eye exposure. The laser beam can cause flash
86 mm
blindness.
Part No. : 4931 4476 88
Do not stare into the laser beam or direct it towards other
people unnecessarily.
Don't dazzle other individuals.
WARNING:
Do not operate the tool around children or allow children to
operate the tool.
The reflective surface could reflect the beam back at the
operator or other persons.
Keep extremities in a safe distance from the moving parts.
Carry out periodic test measurements. Particularly before,
during and after important measurements.
Watch out for erroneous measurements if the product is
defective or if it has been dropped or has been misused or
modified.
WARNING: Use of controls, adjustments, or the performance
of procedures other than those specified in the manual may
result in hazardous radiation exposure.
The laser distance measurer has limits of use. (Refer to the
"Technical data" section). Attempts to measure outside the
maximum and minimum range will cause inaccuracy. Use in
adverse conditions including too hot, too cold, very bright
sunlight, rain, snow, fog, or other vision restricting conditions
will result in inaccurate readings.
When the laser distance measurer is brought into a warm
environment from very cold conditions, or vice versa, allow it to
come to the surrounding temperature before use.
Always store the laser distance measurer indoors, avoid
exposing the tool to shock, continuous vibration or extreme
temperatures.
Always keep the tool away from dust, liquids and high humidity.
These may damage internal components or affect accuracy.
Do not use aggressive cleaning agents or solutions. Use only a
Year of production (e.g. 2014)
clean, soft cloth for cleaning.
Code for month the product is manufactured
(e.g. A=January, B=February, C=March, ... ...) Avoid heavy impact to or dropping of the measuring tool. The
accuracy of the tool should be checked before use if it has
Production code, 6-digits serial number
been dropped or subjected to other mechanical stresses.
from 000001-999999, same as on the Identi cation
Label
Any repair required on this laser product should be performed
only by authorised service personnel.
Do not operate the product in explosion hazardous areas or in
aggressive environments.
Only use chargers recommended by the manufacturer to
charge the batteries.
Flat batteries must not be disposed of with household
waste. Care for the environment and take them to the
collection points provided in accordance with national or
local regulations. The product must not be disposed with
household waste. Dispose of the product appropriately in
accordance with the national regulations in force in your
country. Adhere to the national and country specific regulations.
Please contact your local authority or your dealer for how to
dispose of batteries properly.
European Conformity Mark
Black
1