SonoSite SiteStand Manual Do Usuário página 29

To adjust the angle of the cylinder-type display:
Hold the display with both hands.
1
Rotate the display forward or back to the desired
2
angle.
Note: If at first the display does not rotate, then push
more firmly.
A set screw controls the tightness of the display
3
angle. (See arrow.)
Caution: The set screw is preset. Do not adjust it.
Turning the set screw loosens the display, causing the
display to drop, and can cause damage to the display.
Chapter 3: Using the Accessories
23