About the Menu Entry System
This tuner uses a menu entry system which allows you
to operate various functions by following messages on
the display. Use the following controls for menu
operation.
To:
Use the
enter the menu mode.
MENU button
display different items or
TUNING/SELECT knob
settings.
ENTER button
select the currently displayed
item or setting.
RETURN button
return to a previous stage in the
menu mode.
Selecting the German Display
You can choose either an English or a German
language display. The factory preset language is
English. To change the display to German, follow the
steps below.
1
Press MENU, then turn TUNING/SELECT until
"Language" appears in the display.
2
Press ENTER.
"Select" appears in the display.
3
Turn TUNING/SELECT to choose "German."
4
Press ENTER.
The setting remains in effect until you change it
again.
Customizing the Display
You can choose the appearance of the display from one
of the following four display modes.
1
Press MENU, then turn TUNING/SELECT until
"Disp-Mode" appears in the display.
2
Press ENTER.
"Select" appears in the display.
3
Turn TUNING/SELECT to select a display mode.
Full Display/Full Brightness
.
Full Display/Dimmed
.
Minimal Display/Full Brightness
.
Minimal Display/Dimmed
4
Press ENTER.
The setting remains in effect until you change it
again.
If you press one of the buttons on the main unit,
the minimal display changes to the full display
with the selected brightness. After about 4
seconds, the display returns to the display mode
you selected.
Getting Started
7
GB