Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
How to install with an external caller id device
If you have an external caller id device, follow these steps to install it:
It is necessary an additional phone cable.
1.- Unplug phone line cable from the telephony wall plate.
2.- Plug phone line cable to LINE connector in your caller ID device.
3.- Plug a phone cable (not included) from PHONE in your Caller ID
device to left RJ11 connector in your Cancelatel.
4.- Plug the supplied phone cable to right RJ11 connector in
Cancelatel, and opposite end to your phone.
Note:
Remember, you must have Caller ID service for an optimum perform.
18
1
2
3
4
Publicidad
Tabla de contenido
