Usage Instructions - Scubapro Nova 230 Manual Del Usuario

USAge iNStRUCtiONS

to turn ON the SCUBAPRO Nova 230
dive light: Turn the casing clock-wise until it
is finger-tight and the light is on. Make sure
not to over tighten the casing as this could
result in pre-mature wear and/or damage to
the O-rings.
*NeveR USe tOOlS Of ANY kiNd tO
tighteN the CASiNg*
to turn Off the SCUBAPRO Nova 230 dive
light: Slowly turn the casing counter-clockwise
until the light turns off. Once the light is off, do
not turn the casing any further.
If the casing is turned too far, flooding of the
SCUBAPRO Nova 230 LED light may result.
! wARNiNg
This product uses alkaline batteries only.
Using rechargeable batteries may cause
damage and possible explosion. Do not
alter or modify the dive light. If modification
causes water leakage or other malfunctions,
warranty will be void.
Proper storage: if dive light is not to be used
for a long period of time, remove batteries to
avoid accidental leakage.
Proper maintenance: frequent use of dive
light may cause o-rings to dry out. To avoid
leakage, clean o-ring groove with a cotton
swab and regularly apply lubricant to o-rings
to help prevent dry cracking. Please rinse the
Nova 230 with fresh water before storing.
SCUBAPRO Nova 230 - Warranty
All warranty claims must be returned with
dated proof-of-purchase to an Authorized
SCUBAPRO Dealer.
2