Crushing Ice; Position "P - Beko TBN 7802 X Manual Del Usuario

Operation
3
WARNING: Do not
remove ingredients
A
from the glass conta-
iner (3) before chop-
ping blade (9) has
completely stopped.
7. Remove the glass container (3)
by pulling it up from the body
(4).
8. Open the lid (2) and remove the
ingredients.

3.6 Crushing ice

1. Attach chopping blade (4) in
glass container (3) (see. 3.4).
2. Put ice into the glass container
(3).
3. Operate speed adjustment but-
ton (7) in position "P" for crus-
hing ice (see. 3.8).
4. Open measuring cap (1) to put
more ice in glass container (3)
during the process. Drop ice cu-
bes in the glass container thro-
ugh this opening one by one.
Table Blender / User Manual

3.7 Position "P"

Operating the appliance with the
speed adjustment button in (7) po-
sition "P" for 1-2 seconds is called
"PULSE".
Hold speed adjustment button (7)
in position "P" for mixing with high
speed short pulses. When you re-
lease the button, speed adjust-
ment button (7) returns to "OFF"
position automatically and the ap-
pliance starts stopping.
13 / 99 EN