Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
1. Connect the charger using the charging point on
the rechargeable grass and shrub cutter. (
2. Connect the charger to the mains supply.
The charging process starts when the green LED
remains constantly illuminated. The battery is fully
charged once the LED is no longer illuminated.
1)
(
The temperature range for the charging process
should between 0 °C and +45 °C.
Maximum charging time: 4 h
3. Disconnect the plug from the charging device and
from the device.
The battery is protected from overcharging and
can thus remain connected to the mains supply.
Operation
Turn on the device
1. Push the die kill-switch forwards. (
2. Press the activating switch. (
3. You can release the kill switch whilst you press
the switch.
A clicking sound can be heard after you have
turned the device on. This is due to the mechanics
and fully normal.
Turn off the device
1. Release the activation switch.
2. Wait until the blade stops moving. The blade contin-
ues to run after the motor has been switched off!
Changing the blade
Danger - risk of injury!
The blades continue to run after the motor has
been switched off!
Danger - risk of injury!
Always put the blade protection into protection in
place and wear protective gloves!
3. Press both unlocking buttons together to take out
3)
the blade. (
13
1)
2-1)
2-2)
4. Lubricate the gearbox enclosure with grease
regularly.
5. Insert the blade into the mounting and press it
firmly into the base of the blade to click it into place.
(
4)
6. Clean the blade with a brush or dry cloth. Remove
any impurities that may be present from the gear-
5)
box enclosure. (
Information on operation
„ Only use if visibility is good.
„ Only work with a sharp cutter blade.
„ The operating time of the shrub cutter depends on
the condition of the battery and the properties of the
items being cut. Frequently switching the device on
and off reduces the operating time.
Storing the rechargeable grass and shrub
cutter and charger
„ Store the device in a place inaccessible to children
and unauthorised persons.
„ Only store the device with the blade protection
attached.
„ Do not place any other objects on the device.
„ Store the device in a dry, frost-free location with an
ambient temperature between 0 °C and +35 °C.
„ Only store the device with the battery fully charged.
Recharge the battery for approximately 2 hours
after a 6-month storage period.
The optimum temperature for storing the device
is between 0 °C and 20 °C.
Repairs
„ Repairs must only be carried out at AL-KO service
centres or authorised specialist firms.
„ Only use original parts.
Maintenance and care
Danger - risk of injury!
Always wear work gloves when carrying out
maintenance on the cutter blade!
Translation of original user instructions
GS 3,7 Li Multi Cutter
Publicidad
Tabla de contenido
