Kohler STERLING 5900 Serie Guia De Instalacion página 11

Roller
Inside Rail
Position handle
toward inside of
shower.
Inside Panel
Inside of
Bath/Shower
11. Install the Door Panels
NOTE: Perform these installation steps from outside the bath/shower.
Install the Inside Panel
Lift the inside door panel with the rollers facing away from you.
Position the rollers on the inside rail of the top track.
Position the bottom of the door panel in the bottom track guide.
Check the panel for proper alignment and smooth operation. Adjust as needed.
After adjusting, align the inside panel with the wall jamb on the showerhead side of the
bath/shower.
Adjusting the Rollers
Remove the door panel.
Loosen the roller screw(s) and move the roller(s) in the slot to align the panel.
Tighten the screws and reinstall the panel.
Install the Outside Panel
Lift the outside door panel with the rollers facing you and position the rollers on the outside rail.
Position the bottom of the door panel over the bottom track guide.
Check the panel for proper alignment and smooth operation. If adjustment is needed, follow the
adjustment directions above.
Sterling
Roller
Top Track
Outside of
Bath/Shower
11
Top Track
Outside Rail
Outside Panel
Bottom Track Leg
1034033-2-B