Safety Alert Messages-Internal Electrical And Mechanical Hazards; External Mechanical Hazards; Safety Placards-External Mechanical Hazards - Milnor T6X Guía De Seguridad

For All Users
2.1.2 Safety Alert Messages—Internal Electrical and
Mechanical Hazards
The following are instructions about hazards inside the machine and in electrical enclosures.
WARNING: Electrocution and Electrical Burn Hazards — Contact with electric
Keep yourself and others off of machine.
�
Know the location of the main machine disconnect and use it in an emergency to re-
�
move all electric power from the machine.
WARNING: Entangle and Crush Hazards — Contact with moving components nor-
Know the location of all emergency stop switches, pull cords, and/or kick plates and
�
use them in an emergency to stop machine motion.
BNWRUS06 / Pending
2.2

External Mechanical Hazards

2.2.1 Safety Placards—External Mechanical Hazards
One or more safety placards on the machine, similar to the following, alert personnel to hazards
around the front, sides, rear or top of the machine.
6
power can kill or seriously injure you. Electric power is present inside the
cabinetry unless the main machine power disconnect is off.
Do not unlock or open electric box doors.
�
Do not remove guards, covers, or panels.
�
Do not reach into the machine housing or frame.
�
mally isolated by guards, covers, and panels, can entangle and crush your
limbs. These components move automatically.
Do not remove guards, covers, or panels.
�
Do not reach into the machine housing or frame.
�
Keep yourself and others off of machine.
�
BNWRUS05.C03 0000234671 A.4 A.7 A.3 1/2/20 2:19 PM Released
BNWRUS06 0000233619 A.5
BNWRUS06.C01 0000234670 A.4 A.5 A.3 1/2/20 2:19 PM Released
BNWRUS06.C02 0000234713 A.4 A.5 A.3 1/2/20 2:19 PM Released
1/2/20 2:19 PM Released
Pellerin Milnor Corporation