Charging - MyKronoz ZeTel Manual De Instrucciones

1.

CHARGING

1.
6
2.
3.
Charge ZeTel for two hours before your first use
1. Put the charging cradle beneath the watch
2. Make sure the pins on the cradle fit correctly
onto the charging terminals on the back of ZeTel
3. Connect the charging cradle with the USB
cable
4. Plug the big end of the USB cable to a
power source
5. A battery indicator will fill to indicate charging
is in progress. Once ZeTel is charged, the battery
indicator will be full
i
A full charge takes 1 hour. Unplug the
cable after ZeTel is fully charged. When
the battery level gets low, a low battery
indicator will appear