Description Of The Remote Control - Ltc Audio CDM100-BL Manual Del Usuario

DESCRIPTION OF THE REMOTE CONTROL

1. STANDBY
2. 0-9 number keys & 0/10 & 10+
3. FF+
4. FF-
5.   buttons
6. Pause
7. A-B
8. CD/USB
9. Source
10. Random
11. Search
12. EQ
13. Intro
14. Mute
15. Loudness
16. Volume +
17. Volume –
18. Bass +
19. Bass –
20. Treble +
21. Treble –
22. Repeat
23. Stop
24. Play
25. Memory
26. CH-
27. CH+
28. Program
29. Goto
30. Eject
31. Reset
IR REMOTE CONTROL SENSOR
- Even if the remote control is operated within the effective range, its operation may be impossible if there are any
obstacles between the appliance and the remote control.
- If the remote control is operated near other appliances which generate infrared rays, or if other remote control
devices using infrared rays are used near the appliance, it may operate incorrectly.
SETTINGS & BASIC OPERATION
Standby
To turn on the micro system, press button 01 on front panel of the unit or 1 on the remote control. Press the button
again to turn off the micro system
SOURCE BUTTON
Press the SOURCE button (9) repeatedly to switch among CD/TUNER/LINE IN /BT modes. To select the USB mode
please select the CD MODE and press CD/USB button on remote control to switch into USB mode.
MUTE Button (On Remote Control Only)
1. You can also press the MUTE button on the remote control to turn off the sound temporarily, for example, when
answer the telephone. Press the MUTE button again to cancel the mute function and restore the sound.
2. The mute function will also be cancelled automatically by pressing the VOLUME + or – buttons.
VOLUME L EVEL
Turn the VOLUME knob on front panel or press VOL +/ VOL - buttons on remote control to adjust the volume level.