Temperature Setting - Beko SGA7126P Manual Del Usuario

3 Operation
3.1 Intended use
This appliance is intended only for household use
and ironing; it is not suitable for professional use.
3.2 Initial use
1. Remove the package on the lime collecting
cartridge (1) which is placed separately in the box.
2. Soak the lime collecting cartridge (1) in the
water for 1 minute in order to enhance its
performance.
3. Then push the cartridge (1) in its slot.
4. Prior to initial use, fill the water reservoir (5)
with water (see 3.6) and evaporate the water
twice in order to remove the manufacturing
residues.
C
A light odour may arise during the
initial use. This condition will return
to normal after several uses.
8 / EN
3.3 Ironing tips
• The appliance gets heated in a short time; iron
fabrics such as synthetic, silk etc. using low
temperature settings.
• Iron fabrics that may luster (silk etc.) by turning
them inside out or using the appliance in Smart-
ECO mode.
• Use very little pressure when ironing fabrics
such as velvet and iron them towards one single
direction.
• Steam usage may cause stains on coloured silk
fabrics. Do not use steam.
1 min.
• 100% pure woolen clothes can be ironed by
using steam.
• Ironing woolen clothes may cause luster. Iron by
turning them inside out.
A
1

3.4 Temperature setting

Set the appropriate temperature for the fabric to
be ironed by using the control button (11).
Fabric
Type
Synthetic
Silk-Wool
Cotton
Linen - Jean
WARNING: Do not allow the iron
to contact with metal parts such as
zippers and rivets. This may damage
the soleplate of the iron.
Tempe-
rature
Setting
•
••
•••
Max
Steam Station / User Manual
Steam
Setting
Without
steam
With Steam
With Steam
With Steam