Icematic And Ice Storage Box; Ice-Maker - Beko GN162320X Manual Del Usuario

Ocultar thumbs Ver también para GN162320X:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 258
Using the product

5.15. Icematic and ice storage box

(Optional)
Fill the icematic with water and put in place.
The ice will be ready after approximately two
hours. Do not remove the icematic to take the
ice.
Turn the buttons on the ice chambers right-
hand side by 90°; the ice will fall to the ice sto-
rage box below. You may then remove the ice
storage box and serve the ice.
C
The ice storage box is intended for
storing ice only. Do not fill with water.
Doing so will cause it to break.

5.16. Ice-maker

(Optional)
Ice maker is located on the upper section of the
freezer cover.
Hold the handles on the sides of the ice stock
reservoir and move up to remove.
Remove the ice-maker decorative lid by moving
up.
OPERATION
To remove the ice reservoir
Hold the ice stock reservoir from the handles, then
move up and pull the ice stock reservoir. (Figure 1)
To reinstall the ice reservoir
Hold the ice stock reservoir from the handles, move up
with an angle to fit the sides of the reservoir to their
slot and make sure that the ice selector pin is mounted
properly. (Figure 2)
Push downwards firmly, until there is no space left
between the reservoir and the door plastic. (Figure 2)
If you have difficulty in refitting the reservoir, turn the
rotary gear 90° and reinstall it as shown in the figure3.
Any sound you hear when the ice drops into the
reservoir is a part of normal operation.
32 / 39 EN
 
Refrigerator / User Guide

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido