TROUBLESHOOTING ______________
Although the appliance is plugged in, soleplate
The appliance may be connected improperly. >>> Check the plug and power
A
cable
of the appliance.
Temperature adjustment knob
temperature adjustment knob in the clockwise direction up to the steam sign.
The appliance does not generate steam.
The water reservoir may not have enough water. >>> Fill the water reservoir with
water up to Max level.
Steam setting button
setting button to the steam position.
Shock Steam – Vertical Steam does not function.
These functions may have been used too frequently in a very short period of time.
>>> Keep ironing at a horizontal position and wait for a while before using the
shock steam function again. >>> Soleplate
Temperature adjustment knob
Seat the appliance in a vertical position and wait for the soleplate to heat up.
Water drops fall down onto the fabric during ironing.
You may not have securely closed the water refill lid
lid securely.
You may be using the shock steam at temperature level • or ••.
>>> Increase the temperature level.
During ironing, sediments and residues fall down from the soleplate
If the water you use for your appliance is too hard, such sediments may form. >>>
Use the selfclean function for once or a few times. For the subsequent ironings
fill the water reservoir of the appliance with a mixture of tap water and potable
water.
The appliance drops water after it cools down or stored.
You may have left the appliance on a horizontal position while there is water in its
reservoir. >>> Empty the water reservoir.
Stains at the soleplate
Wet garments might have been ironed and the soleplate
>>> After the appliance cools enough, wipe the soleplate with a microfiber knitted
or cotton cloth soaked in vinegar.
38
ENGLISH
E
may be at the Min. position. >>> Turn the
I
may be at withoutsteam position. >>> Switch the steam
E
in the clockwise direction up to the steam sign.
F
.
F
does not heat up.
F
may not be hot enough. Turn the
H
. >>> Close the water refill
F
has had lime stains.
F
.