First Time Use; Energy Star - Honeywell PROFESSIONAL HPA600 Serie Manual Del Usuario

FIRST TIME USE

There are two 3-in-1 HEPA Filters supplied within your air purifier. These
filters provide three stages of cleaning performance: HEPA filter media that
helps capture up to 99.97% of airborne particles as small as 0.1 micron
antimicrobial coating that inhibits growth of bacteria on filters
carbon granules help absorb odors and VOCs. The filters are wrapped to
ensure purity, and are labeled to help identify the proper replacement filter
(Type filters should be replaced 1x/year). Before using your new air
Z
purifier, you must remove the wrappers covering the filters.
• Make sure the air purifier is OFF and unplugged.
• Open the rear door to remove the filters . Remove the HEPA filters from the
two sides of the unit (see Fig. 2).
• Remove the filters from the plastic bags.
• Install the filters into the unit with the red pull tabs facing outward
(this will facilitate filter removal later). The side of the filter with the carbon
granules (black side) and foam seal should be facing in to the purifier
housing (see Fig. 3).
• Close the rear door and plug the unit into an outlet. You are now ready to
use your new Honeywell Professional Series™ True HEPA Air Purifier.
ENERGY STAR®
This product earned the ENERGY STAR® by meeting strict energy efficiency guidelines set by the U.S.
EPA. The U.S. EPA does not endorse any manufacturer claims of healthier indoor air from the use of
this product.
The energy efficiency of this ENERGY STAR® qualified model is measured based on a ratio between the model's
Clean Air Delivery Rate (CADR) for Dust and the electrical energy it consumes, or CADR/Watt.
OPERATING INSTRUCTIONS
• Ensure the air purifier is plugged into a working electrical outlet. A chime will sound and the power light will
illuminate when plugged in.
• Tap the power icon once. The unit will start at cleaning level 2 and remain on this setting until another
cleaning level is selected.
• Tap the Cleaning Level icon to select a different cleaning level.
Portable air purifiers are more effective in rooms where all doors and windows are closed. It is recommended that
you run your air purifier while you are at home to help clean the air. If desired, or conditions warrant, you may run
your air purifier 24 hours a day.
,
1
, and activated
2
Fig. 2
Fig. 3
4
CONTROLS
The Honeywell Professional
Series™ True HEPA Air Purifier
has easy-to-use controls to
help you manage your indoor
air quality. Each time you
select a setting you will hear
a chime indicating the setting
has been changed.
CLEANING LEVEL SELECTOR
This controls the air cleaning level of the unit. This Honeywell Professional Series™ Air Purifier has 4 cleaning
levels plus a Turbo setting for power cleaning. Each time you turn your air purifier on it will start at cleaning level 2
setting. TAP the icon to cycle through the cleaning levels to reach the desired setting.
Level 1 – Sleep
This setting is best for ultra-quiet operation, perfect for nighttime use when sleeping.
Level 2 – Germ
This setting slows down air movement so microscopic airborne germs are most effectively captured in
the filters. Germs, like certain bacteria and viruses, can be much smaller than other airborne particles or
organisms. Giving the germs more time to dwell in the filters increases the filtration efficiency. This setting
can be used during cold and flu season to help reduce certain germs from the air that passes through the
filters.
Level 3 – General Cleaning
Best for General Cleaning. Use this setting to help reduce airborne dust and smoke particles, like those
resulting from cooking or tobacco smoke. This setting is also very effective in reducing airborne pet dander.
Level 4 – Allergen
This setting makes the air purifier perform at the proper level for reducing many types of airborne allergens.
It ensures the allergen capturing efficiency and rate is best for the particle sizes being captured.
TURBO MODE
When Turbo Mode is selected the will illuminate. This setting operates the air purifier at the highest cleaning
level and maximizes its ability to help clean the air and help reduce odors and VOCs quickly.
AIR QUALITY INDICATOR
Your Honeywell Professional Series™
Air Purifier is equipped with Particle
and VOC Sensors that detect the levels
of particles and VOCs in the room and
provide a visual display to indicate air
quality. The Air Quality Indicator is an LED display located on the front of the air purifier below the Honeywell logo.
The particle and VOC sensors are constantly monitoring the air and the air quality indicator light will illuminate
blue, amber, or red depending on the level of VOCs and/or particles detected in the room.
Blue – Good air quality. There is a low level of VOCs and particles detected.
Amber – Medium air quality. There is a moderate level of VOCs or particles detected.
Red – Poor air quality. There is an elevated level of VOCs or particles detected.
5