Axis T93E05 Guia Del Usuario página 9

AXIS T93E05 User's Guide
5. Tighten the cable gland nut.
6. Connect the camera to the network.
7. Loosen the bracket adjustment screw to aim the camera to the point of interest and focus the
camera using an installation display, available as an optional accessory from Axis, or according
to the instructions in the Installation Guide provided with the camera.
8. Remove the plastic wrapper from the desiccant bag and put the desiccant bag in the hollow
space around the cable gland.
Example image: AXIS M1114 Network camera and AXIS T93E05 Protective Housing
Note: The desiccant bag should be replaced regularly. Always replace the desiccant bag after the
housing has been opened.
9. Close the top cover and tighten the bottom cover screws.
CAUTION!
Risk of pinching
Be aware of the hinge space between the top and bottom covers. Never put your fingers between
the hinges while closing the top cover.
10. Loosen the sunshield adjustment screws and adjust the sunshield to the desired position.
Desiccant bag
Sunshield adjustment
screw and washer (2x)
Bottom cover screw (2x)
Page 9