LG RESU16H Prime Manual De Instalación página 13

3.2.2.3 User Agreement
1. Search the product which you will install.
2. Get the agreement of privacy policy for the customer.
3. If the customer agrees the privacy policy, have customer's personal information.
1
2
3.2.2.4 RMD Wi-Fi Direct Connection
In order to install using RMD, you must fi rst use RMD's Wi-Fi direct connection.
For the RMD's Wi-Fi direct connection, see below.
Search and access the SSID of the RMD AP from a device capable of supporting WLAN
Station functions (ex. smartphone).
RMD SSID has a structure of "RESU_(or RMD) + RMD WLAN STM MAC ADDRESS".
For the devices below, the SSID of the RMD SoftAP is "RESU_44CBXXXC14F(or
RMD44CBXXXC14F)". The password is 12345678(changeable).
When Wi-Fi connection is complete, click the "Next" button.
3.2.2.5 QR Code Scan
The QR code scanning method is as follows.
1
When the QR code registration is complete, click the "Next" button.
If the scanned serial number matches the actual serial number, it will proceed to the next
section.
There are three (3) QR codes: Battery Control Unit, Battery Module A, and Battery Module B.
3
Wall
Wall
3.2.2.6 External Internet Connection
(※ If the end user does not wish to use an external internet connection, simply press the
3.2.2.6.1 Ethernet Connection (primary)
Connect the ethernet cable to a router with internet access.
For Ethernet use, it is enough to connect the cable. Since you have already connected the
cables earlier, no additional confi guration is required.
Select
Prime: Fixed at 2
FLEX: Select from 2 to 4
S/N of consecutive QR
codes are automatically
displayed(Maximun 5)
1. Battery Control Unit QR Code
2. Battery Module QR Code
Wall
Wall
"Next" button.)
13