Tabla de contenido
Publicidad
GB
COMPONENTS AND CONTROLS (PIC.1)
Handle c/w motor and On/Off switch
2
Blade casing
3
Blade guard
4
5
Table lock knob
6
Dust bag collector
7
BTL305:
COMPONENTS AND CONTROLS (PIC.1)
2
Handle
3
Static blade guard
4
Fence
5
Dust bag
6
Mitre degree scale
7
Mounting holes
8
On/Off trigger
9
Carry handle
Brush cover and motor housing
Blade guard release lever
CAUTION:
WARNING!
Before carrying out any maintenance or adjustments the
INSTALLING THE MITRE SAW (PIC.2)
machine needs to be moved frequently it can be secured to a
ASSEMBLY (PICS.3&4)
FITTING THE TABLE LOCKING KNOB (PIC.3)
To fit the table locking knob locate the threaded hole in the front
8
Base
9
Bench mounting holes
Blade guard lock
Degree scale
Pointer
Fence
TCT blade
Bevel locking lever
Bevel degree scale
Table locking knob
Mitre latch
Spindle lock
Dust outlet
Lock down pin
Scale pointer
22
Power lead
FITTING THE DUST COLLECTION BAG (PIC.4)
Fit the dust bag over the extraction outlet situated at the rear
The flap is shown in the up position to allow the dust bag to
emptied frequently as a full bag reduces its effectiveness to
Caution: Dust particles may cause respiratory problems
ready for operation apply downward pressure to the handle
ADJUSTMENTS REQUIRED BEFORE USING THE
MACHINE (PICS.6 TO 18)
The following adjustments must be made before operating the
24
Publicidad
Tabla de contenido
